ATS01N209RT
soft starter for asynchronous motor - ATS01 - 9 A - 460..480 V
Range: Soft Start - Altistart 01 FAQ Documents & Downloads-
Product availability :
Stock - Normally stocked in distribution facility
-
Characteristics
Main range of product Altistart 01product or component type Soft starterproduct destination Asynchronous motorsproduct specific application Simple machinedevice short name ATS01Phase 3 phases[Us] rated supply voltage 460...480 V - 10...10 %motor power hp 5 hp 3 phases 460...480 VIcL starter rating 9 Autilisation category AC-53B EN/IEC 60947-4-2current consumption 45 A at nominal loadtype of start Start with voltage ramppower dissipation in W 4 W at full load and at end of starting94 W in transient stateComplementary assembly style With heat sinkfunction available Integrated bypasssupply voltage limits 414...528 Vsupply frequency 50...60 Hz - 5...5 %network frequency 47.5...63 Hzoutput voltage <= power supply voltage[Uc] control circuit voltage Built into the starterstarting time 1 s 10010 s 105 s 20Adjustable from 1 to 10 sdeceleration time symb Adjustable from 1 to 10 sstarting torque 30...80 % of starting torque of motor connected directly on the line supplydiscrete input type Logic LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA 27 kOhmdiscrete input voltage 24...40 Vdiscrete input logic Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mAdiscrete output current 2 A DC-133 A AC-15discrete output type Open collector logic LO1 end of starting signalRelay outputs R1A, R1C NOdiscrete output voltage 24 V 6...30 V open collector logicminimum switching current 10 mA 6 V DC relay outputsmaximum switching current 2 A 250 V AC inductive cos phi = 0.5 20 ms relay outputs2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputsdisplay type 1 LED green starter powered up1 LED yellow nominal voltage reachedtightening torque 4.42 lbf.in (0.5 N.m)16.81...22.12 lbf.in (1.9...2.5 N.m)electrical connection 4 mm screw clamp terminal rigid 1 1...10 mm² AWG 8 power circuitScrew connector rigid 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal rigid 2 1...6 mm² AWG 10 power circuitScrew connector rigid 2 0.5...1 mm² AWG 17 control circuitScrew connector flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit4 mm screw clamp terminal flexible without cable end 1 1.5...10 mm² AWG 8 power circuitScrew connector flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal flexible with cable end 2 1...6 mm² AWG 10 power circuit4 mm screw clamp terminal flexible without cable end 2 1.5...6 mm² AWG 10 power circuitScrew connector flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuitmarking CEoperating position Vertical +/- 10 degreeheight 4.88 in (124 mm)width 1.77 in (45 mm)depth 5.16 in (131 mm)product weight 0.93 lb(US) (0.42 kg)compatibility code ATS01N2Environment electromagnetic compatibility Damped oscillating waves level 3 IEC 61000-4-12Electrostatic discharge level 3 IEC 61000-4-2Immunity to electrical transients level 4 IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3Voltage/current impulse level 3 IEC 61000-4-5Conducted and radiated emissions level B CISPR 11Conducted and radiated emissions level B IEC 60947-4-2EMC immunity EN 50082-2Harmonics IEC 1000-3-2Harmonics IEC 1000-3-4Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6Micro-cuts and voltage fluctuation IEC 61000-4-11EMC immunity EN 50082-1standards EN/IEC 60947-4-2product certifications CCCCSAULC-TickGOSTB44.1-96/ASME A17.5 for starter wired to the motor delta terminalIP degree of protection IP20pollution degree 2 EN/IEC 60947-4-2vibration resistance 1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-61 gn 13...150 Hz EN/IEC 60068-2-6shock resistance 15 gn 11 ms EN/IEC 60068-2-27relative humidity 5...95 % without condensation or dripping water EN/IEC 60068-2-3ambient air temperature for operation 14...104 °F (-10...40 °C) without derating104...122 °F (40...50 °C) with current derating of 2 % per °Cambient air temperature for storage -13...158 °F (-25...70 °C) EN/IEC 60947-4-2operating altitude <= 3280.84 ft (1000 m) without derating> 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 mOrdering and shipping details Category 22392 - ATSU01/ATS01 LOW HP SOFT STARTERSDiscount Schedule I11GTIN 00785901875871Nbr. of units in pkg. 1Package weight(Lbs) 1.2Returnability YCountry of origin DEContractual warranty Warranty period 18 months -
Documents and Downloads (6)
-
Dimensions Drawings
DimensionsMounting on Symetrical (35 mm) RailScrew Fixing(1)Retractable fixings -
Connections and Schema
Example of Manual ControlA1 :Soft start/soft stop unit(1)For type 2 coordinationQ1 :Motor circuit-breakerF3 :3 fast-acting fuses -
Technical Description
Function Diagram2-wire Control with DecelerationUs :Power supply voltageLED 1 :Green LEDLI2 :Logic inputR1 :Relay outputLO1 :Logic outputLED 2 :Yellow LED3-wire Control with DecelerationUs :Power supply voltageLED 1 :Green LEDLI2, LI1 :Logic inputsR1 :Relay outputLO1 :Logic outputUm :Motor voltageLED 2 :Yellow LED